About Blog

This author has not yet filled in any details.
So far Blog has created 19 blog entries.

Jim Littleton – Vice President

Jim joined the Red Clay team in 2010 and was named Vice President in 2012.  His entire professional career has been with unlimited license general contractors.  Beginning in 1992 he was a project manager for a building contractor for and then vice president of a site/heavy highway contractor.  Jim graduated with a B.S. in Civil [...]

2023-03-29T16:23:00+00:00Team|0 Comments

James “Jim” Smith – President

Jim has spent his entire life in the asphalt paving industry.  As early as 12 years old he was batching asphalt for his father’s paving company on Long Island, New York.  After attending Kent State he decided to return to the trade.  After several years of paying his dues, he started Red Clay Industries in [...]

2023-03-29T16:23:00+00:00Team|0 Comments

Why should asphalt pavement be sealed?

Asphalt is a porous material, susceptible to oxidation from the sun and damage from water penetrating beneath the surface of the asphalt. Also chemicals such as gasoline, diesel fuel, oil, antifreeze and even salt. Asphalt pavement will also ravel away after time. Seal coating not only makes your pavement look new, it protects it from [...]

2023-03-29T16:23:00+00:00Asphalt|0 Comments

Is asphalt pavement high maintenance?

All pavements require maintenance. Preventive maintenance is the less expensive, early detection and repair of minor defects, before major corrective action is necessary. A parking lot is an investment, as is a building, just as a building must be maintained, so must a parking lot/area.

2023-03-29T16:23:00+00:00Asphalt|0 Comments

Is asphalt less expensive than concrete?

Asphalt pavements have a lower life cycle cost. The initial cost of asphalt pavement construction is usually less than concrete. But, in addition to construction cost, an increasingly important factor is construction time. More area can be covered with asphalt pavement than with concrete in a period of time. Also, asphalt repairs are less expensive.

2023-03-29T16:23:00+00:00Asphalt|0 Comments

What is an overlay?

An overlay is the resurfacing of existing pavement. Existing asphalt or concrete pavements can be overlaid with hot mix asphalt with excellent results. Before paving, existing pavement should be checked for any repairs needed, cleaned of all loose debris and tacked for successful adhesion.

2023-03-29T16:23:01+00:00Asphalt|0 Comments

What equipment is used to install hot mix asphalt?

A few examples are as followed: A milling machine is typically used to remove the surface material of existing pavement and the area is cleaned of loose debris on an overlay project. Distributor tanks are used to apply prime coats and/or tack coats. Dump trucks are used to transport hot mix asphalt material from the [...]

2023-03-29T16:23:01+00:00Asphalt|0 Comments